主要應用
The main application
Liposome doxorubicin
Amphotericin B liposome
Paclitaxel liposomes
Oxaliplatin liposomes
Irinotecan liposome
SiRNA liposome
Albumin paclitaxel nanoparticles
Nucleic acid liposome
Other whole li posome samples
擠出原理
Technical features
脂質體擠出的原理在于，通過一定的擠出動力源將脂質體樣品粒子進行擠壓，使其在一定壓力條件下通過 PC濾膜， 此壓力作為粒子過膜過程中的剪切力可使其達到粒徑控制的效果。不論形態、大小和分布都可得到極大改善。
The principle of liposome extrusion is that the particles of liposome sample are extruded by a certain extrusion power source to pass through the PC membrane under a certain pressure. The pressure acts as the shear force in the process of the particles passing through the membrane, which can achieve the effect of particle size control. The shape, size and distribubtion can be greatly improved.
支撐板和濾板主要起到支撐濾膜的作用。 由于磷脂有一定的相變溫度，所以在擠出之前需要對擠出器夾套通入恒溫水進行預熱至一定溫度（50~60℃），且在使用過程中需保持在此溫度。通常的脂質體品種擠出之后粒徑能達到 100nm以下，PDI 能控制在 0.1 以下。
The support plate and the filter plate mainly play the role of supporting the filter membrane.Because of phospholipids have certain phase change temperature before extrusion need access to extruder jacket thermostatic water preheated to a certain temperature (50 ~ 60 ℃), and needs to keep the temperature in the process of use.The particle size of the normal liposome can reach below 100nm after extrusion, and the PDI can be controlled below 0.1.
動力源：氮氣
Power source: nitrogen
技術特征
Technical features
核心部件 The core components
Support plate (SS316L stainless steel)
Filter plate (SS316L stainless steel)
Filter membrane :PC material (polycarbonate)
Sealing system: PU material/polytetrafluoroethylene
Temperature control system: jacket control warm water
技術特點 Technical characteristics
Low sample consumption
High extrusion pressure
No residue
No manual operation required
Whole process temperature control
All parts including "O" rings, gaskets are FDA approved
Easy loading and unloading, easy cleaning and sterilization
All data can be directly amplified
Can be used for high concentration sample processing
Can be used in a clean room, in line with GMP standards
技術參數
Technical Parameter
| 型號 MODEL | Extru 25-20 |
|
最高壓力 [Mpa] The highest pressure[Mpa] |
25 |
|
最終產品粒徑 [nm] Final product size [nm] |
50~1000 |
|
單批處理量[ml] The Final product size[ml] |
0~20 |
|
最高產品濃度[mg/ml] Maximum product concentration[mg/ml] |
200 |
|
工作溫度范圍 Operating temperature range |
5~80℃ |
|
產品材質 Product material |
SS316L |
|
直徑[mm] The diameter of[mm] |
25 |
| 動力源類型 Power source type |
Gas |
智藥研習社官方微信
制藥在線官方微信
2006-2024 上海博華國際展覽有限公司版權所有（保留一切權利）
滬ICP備05034851號-57
