DPH260 high-speed aluminum-plastic blister packaging machine is a new generation of products developed by our company in combination with similar foreign products and the company's mechanical processing technology. DPH260 adopts multi-servo traction, precise control, low noise, fast production speed, stable performance of each module, and convenient mold replacement. Realize the automatic and efficient production of drug packaging, reduce labor costs and material costs to a minimum, effectively improve the production efficiency of enterprises, and ensure that the packaging and production process of drugs fully meets the requirements of GMP.
DPH260 aluminum-plastic blister packaging machine has a wide range of applications, mainly used for packaging drugs (such as tablets, capsules, plastic pills and a variety of special-shaped tablets, etc.), food and other similar products. The packaged items are reliably sealed in blisters and foil of pharmaceutical non-toxic polyvinyl chloride foil (PVC). DPH260 aluminum-plastic blister packaging machine has a wide range of use, which can achieve perfect matching and docking with cartoning machines and other machines to meet the packaging requirements of various plate types and various lines.
DPH-260 plate roll aluminum-plastic blister packaging machine is an ideal blister packaging processing equipment at present. The width of 260 mm is more suitable for the layout of different types of plates, which can achieve a perfect match of one to one (cartoning machine), and improve automation and processing efficiency.
GMP compliant design
The whole machine is wrapped in stainless steel, and the transmission parts are separated from the working area inside the body. The work area is protected by a housing to prevent accidental injury to personnel, and the housing is made of transparent material for easy observation. The bottom of the work area is wrapped in stainless steel for quick cleaning of dust accumulation.
Compact volume
The DPH-260 requires an area of only 5 square meters, which is very convenient for the layout of clean rooms (in-house workshops). The whole machine can be split in half to facilitate transportation and final assembly.
Simple molding replacement design
The forming part is designed with a servo drive directly connected eccentric wheel tie rod and forming body cavity, and the design speed is 30-60 times/min. Replacing the mold only needs to fix a few screws, easy to replace, strong adaptability, can be put into use without repeated adjustment or fine-tuning, low requirements for personnel, saving time and improving the production efficiency of the enterprise.
Flexibility of materials
DPH-260 can be produced using most blister packaging materials, including PVC, PVC/PVDC, PVC/ACLAR and COC cold-formed aluminum.
Zone isolation
The feeding area and testing part are independent from the heat seal and batch number blanking area, and the intervention and non-intervention areas are completely isolated.
Continuous sealing
The rotary sealing mechanism runs continuously and seals, which is fast, stable, impact-free, and has good sealing effect. Outstanding advantages over intermittent systems.
Batch number and blanking
The lot number and the blanking of two parts in a unit are located on the same horizontal line, which maximizes vibration (internal balancing forces). The mold takes up less space, allowing the machine to run at cycles approaching or exceeding 150 cycles per minute.
Output mates
The 260 mm format can be combined with a 1-out 3 combination to facilitate the connection of 1 or 2 subsequent conveyor belts. Under the premise of no remaining material, it perfectly cooperates with the downstream connection.
DPH-260 optional configuration:
Different material feeding system
Blister pinhole detection system (for cold aluminum forming materials)
Vision system to inspect blister material system
Print registration material control system
In-line printer Flexographic or laser printer
Coding inkjet, laser printer, etc
Bar code reading and printing aluminum foil system
Printer connection to PC control system integration
Modem connected to PC control system integration
Remote operation management
Inline downstream automation facilities
.Technical parameters of DPH-260 high-speed roller blister machine
|
Designed maximum production capacity (number of punching cuts/min) |
Aluminum-plastic 80-150/min, aluminum-aluminum 40-80/min |
|
Maximum line speed of packaging materials (M/min) |
20 |
|
Maximum Forming Depth(mm) |
12 |
|
Maximum forming area (width x feed) (mm²) |
260X250 |
|
Maximum width of packaging material(mm) |
260 |
|
Maximum feed length (mm) |
250 |
|
Max. punching length (mm) |
120 |
|
power source |
Power supply: AC380V/three-phase/50Hz Power consumption: 14kw/h |
|
source gas |
Pressure: 0.6 MPa Air consumption: ≥12 m³/h |
|
headwaters |
Temperature: 15-18°C Water consumption: ≥0.08 m³/h |
|
Dimensions (without feeder, LxWxH)(mm³) |
4250X1300X1750 |
|
Weight (kg) |
Approx. 3000KG |
2006-2024 上海博華國(guó)際展覽有限公司版權(quán)所有（保留一切權(quán)利）
滬ICP備05034851號(hào)-57
